PolarStar
Another PolarStar Hop Up Thing - AK
Another PolarStar Hop Up Thing - AK
Couldn't load pickup availability
Another PolarStar Hop Up Thing AK
Precision engineered for the AK platform. Built in the USA.
The PolarStar AK Hop Up brings true TDC (top dead center) hop and micrometer style adjustment to your AK build. It fits AK74, 100 series, RPK, and AK12 builds, and it fixes the guesswork and sloppy adjustment that come with most stock AK hop up units.
Wider range. Finer control.
Most AK hop ups make you choose between range and precision. This one gives you both. The micrometer style thread keeps every click fine and repeatable, so you stop overshooting your ideal setting. Run whatever hop method you like: standard round nub, flat nub, flat hop, or R hop.
Built into the PolarStar ecosystem
The removable threaded gearbox lip and feed tube match PolarStar’s V2 architecture, so it drops right in alongside the PolarStar parts you already run. The gearbox lip has a standard .305" ID and works with most nozzles, including the AEG nozzle in the box. Want to go further? The AK Hop Up also works with PolarStar Direct Attachment Front Cylinders. See below for what you’ll need.
Direct Attachment compatibility
The AK Hop Up works with both JACK and F2 Direct Attachment Front Cylinders for a fully rigid, monolithic setup.
⚠️ Direct Attachment does NOT work with the AK Hop Up on its own. Unlike the M4 version, the AK setup needs two extra parts:
- DA spacer: adapts your current DA cylinder to the AK Hop Up
- #9 JACK or F2 nozzle: gives you the correct nozzle length
Simpler than the M4 setup
Most AK replicas bolt the hop up straight to the outer barrel, so you don’t need the pusher system the M4/V2 Direct Attachment uses. You just cut the gearbox for clearance.
Assembly
Assembly works almost like a normal AK build. Install the gearbox as usual, then the DA assembly, and do the front end last.
Feed tube note
On some models, you may need to adjust the feed tube position slightly. You make that adjustment through the barrel position. It’s most likely if you’re running mismatched mags.
What’s included
- V3 hop up body
- Feed neck
- Gearbox lip
- Adjustment wheel and adjustment thread
- Retainer and mounting hardware
- O rings
- Barrel bushing and barrel clip
- Standard round nub with dowel pin for extra rigidity
Bucking and barrel not included. Direct Attachment cylinder, spacer, and #9 nozzle sold separately.
Confirmed compatible with
- Most LCT AK models
- Marui / JG AK74 models
- CYMA AK74 models
- Arcturus PP1901
Share
